NV35 190LB Canister Clear Contact Adhesive

Nevamar NV35 is designed to be applied to both surfaces about to be joined. Spray an even coat of adhesive with at least 80% to 100% coverage of each surface. Allow to dry 3-5 minutes until tacky. Place the surfaces together and apply pressure evenly across the full bonding surface. For best results: Make sure that the surfaces are dry and free from dirt, grease, oil or other contaminants. Ensure that the adhesives and substrates are at 60°F or higher. If surfaces are porous, a second coat is recommended after the first has dried and become tacky.

• Non-Flammable (Green Label)
• No ODS (Ozone depleting substances)
• Nevamar Bond Performance
• High Temperature Resistance
• Fast Tack
• Water Resistant