Hardware & Accessories Brands we Sell
Surfacing & Edging Brands we Sell
Plywood & Composites Brands we Sell
Finishing Brands we Sell
In Stock
ES10 ZERO-140C
McKillican Item #598101007
View more by NewStar Adhesives Inc.
This product is also availble in additional variations
High-Performance Industrial Strength Solvent-Based Contact Adhesive
EverStrongTM ES10 ZERO is a high-performance industrial strength solvent based contact adhesive formulated with zero VOCs to exceed CA and OTC state regulations. Water resistant and temperature resistant to over 200°F, ES10 is designed for bonding a wide range of substrates to include decorative laminates and veneers, fiberglass, glass, upholstery, fabrics, foam, auto headliners, cork and particle board.
Product Usage
EverStrong™ ES10+ is designed to be applied to both surfaces about to be joined. Spray an even coat of adhesive with at least 80% to 100% coverage of each surface. Allow to dry 3-5 minutes til tacky. Place the surfaces together and apply pressure evenly across the full bonding surface. For best results: Make sure that the surfaces are dry and free from dirt, grease or oil. Ensure that the adhesives and substrates are at 60°F or higher. If surfaces are porous, a second coat is recommended after the first has dried and become tacky.
Storage
Recommended to store off the floor if temperatures below 60°F.
Physical Properties