All Categories >> Particleboard

TemStock-MR by Temple-Inland

General Description

TemStock-MR Moisture Resistant Particleboard

Specify TemStock-MR for cabinets and fixtures with an elevated risk of exposure to liquids and high humidity. Featuring enhanced moisture-resistant resins and other additives, TemStock-MR is formulated to provide increased protection without sacrificing performance. It can be machined, drilled and laminated with premium results.

TemStock-MR passes the CPA-IMR-01-2004 specification.

Environmental Description

Recycled Content Certification:
The particleboard produced in Temple-Inland’s Monroeville, Alabama; Hope, Arkansas; Thomson, Georgia; and Diboll, Texas facilities has been certified by the Composite Panel Association as complying to their Environmentally Preferable Product (EPP) specification standard CPA 2-06 to contain 100% recycled and/or recovered fibers. In addition, this certification verifies Temple-Inland particleboard products conform to both ANSI 208.1 Table B and HUD CFR Part 3280 Formaldehyde Emission Requirements.

LEED Credits Description Recycled Content MR credit 4.1 Specifies 10% of all materials on project to be recycled content. Contribution is based upon recycled percentage of product. Locally Produced Materials MR credit 5.1 Specifies that 10% of all materials on project to be extracted and manufactured within 500 miles of project.
USGBC LEED Potential Credits = 4
LCA ''Life Cycle Assessment'' available LCA ''Life Cycle Assessment'' available?
NAUF? No Added Urea-Formald.   Formaldehyde-Free Adhesive? No Added Formald.
Recycled? Recycled     80% Pre-Consumer    
Manufactured at:   AL 36461, AR 71801
SCS? SCS / 3rd party document available
FSC? FSC document available   SFI? SFI document available
California Air Resources Board Compliant:   meets CARB1? meets CARB1    meets CARB2? meets CARB2
Industry Certifications: EPP Certification? EPP Certification   KCMA Certification? KCMA Certification   SWAQMD VOC 1168? SWAQMD VOC 1168

Finished Product Options

McKillicanEcoProducts
To see products available made different cores and green performance options:

MELAMINE
McKillican EcoTFM panels

HARDWOOD VENEER PANELS
McKillican EcoHardwood Veneer Panels

Ideal Applications

TemStock-MR should be specified for interior use only.

Specify TemStock-MR for cabinets and fixtures with an elevated risk of exposure to liquids and high humidity. Featuring enhanced moisture-resistant resins and other additives, TemStock-MR is formulated to provide increased protection without sacrificing performance. It can be
machined, drilled and laminated with premium results.

Physical Properties

3/8" & thinner / 1/2" and thicker
MOR-Modulus of Rupture (psi) 2103 / 2103
MOE-Modulus of Elasticity (psi) 326,300 / 326,300
IB-Internal Bond (psi) 100 / 90*
Face Screw Holding (lbs) 250 / 250
Edge Screw Holding (lbs) N/A 202**
Formaldehyde Emissions (ppm) .20 / .20
24-Hour Thickness Swell 6.0% / 4.0%

Tolerances
Length and Width ±1/16"
Squareness ±1/8"
Straightness 1/64 / 2 ft
Thickness (within panels) ±0.004"
Thickness (panel to panel) ±0.004"

Thickness/Sizes/Other

Thickness (in.): 1/4" to 1-1/8" thick
Panel Sizes (in.): 49 & 61 (widths) x 73-169 (lengths)
 Document Resource Section


 Print this Page






Professional Resources Available for this Product

MSDS Sheet: TI_particle_msds(1).pdf
Temple Indland PB MSDS

Vendor Product Certifications: CPA_Carb_Certification_Producres_memo_CARB_Compliant_206_2024_2008(5).pdf
CPA certification program CARB COMPLIANT PANEL PRODUCERS letter dated 6-24-2008

Vendor Tech Data Sheet: TemStockMRFR_sales_and_tech.pdf
Temple Indland MR brochure