All Categories >> Particleboard

TemStock -FR by Temple-Inland

General Description

TemStock-FR Particleboard by Temple-Inland

Specify TemStock-FR when constructing wall systems, fixtures, cabinets or furniture for industrial or commercial applications where a Class 1 fire rating is desired. It is an excellent substrate for wood veneers, high and low pressure laminates, as well as vinyl overlays, and may be cut, machined or drilled without significant effect on its flame spread rating.

TemStock-FR meets these code requirements: BOCA, ICBO and SBCCI.

In addition, this certification verifies Temple-Inland particleboard products conform to both ANSI 208.1 Table B and HUD CFR Part 3280 Formaldehyde Emission Requirements.

Environmental Description

The particleboard produced in Temple-Inland’s Monroeville, Alabama; Hope, Arkansas; Thomson, Georgia; and Diboll, Texas facilities has been certified by the Composite Panel Association as complying to their Environmentally Preferable Product (EPP) specification standard CPA 2-06 to contain 100% recycled and/or recovered fibers.

LEED Credits Description Recycled Content MR credit 4.1 Specifies 10% of all materials on project to be recycled content. Contribution is based upon recycled percentage of product. Locally Produced Materials MR credit 5.1 Specifies that 10% of all materials on project to be extracted and manufactured within 500 miles of project.
USGBC LEED Potential Credits = 4
LCA ''Life Cycle Assessment'' available LCA ''Life Cycle Assessment'' available?
NAUF? No Added Urea-Formald.   Formaldehyde-Free Adhesive? No Added Formald.
Recycled? Recycled     80% Pre-Consumer    
Manufactured at:   AL 36461
SCS? SCS / 3rd party document available
FSC? FSC document available   SFI? SFI document available
California Air Resources Board Compliant:   meets CARB1? meets CARB1    meets CARB2? meets CARB2
Industry Certifications: EPP Certification? EPP Certification   KCMA Certification? KCMA Certification   SWAQMD VOC 1168? SWAQMD VOC 1168

Finished Product Options

Melamine panels with NAUF+FR PB core
McKillicanEcoTFM Melamine on NAUF+FR certified PB Core

Ideal Applications

TemStock-FR should be specified for interior use only.

Specify TemStock-FR when constructing wall systems, fixtures, cabinets or furniture for industrial or commercial applications where a Class 1 fire rating is desired. It is an excellent substrate for wood veneers, high- and low-pressure laminates, as well as vinyl overlays, and may be cut, machined or drilled without significant effect on its flame spread rating.

Physical Properties

TemStock-FR meets these code requirements: BOCA, ICBO and SBCCI.

See tech data below for complete information:
Physical prop erties - FR
<5/8" / 5/8 to 3/4" / > 3/4"
MOR-Modulus of Rupture (psi) 1813/ 1600/ 1600
MOE-Modulus of Elasticity (psi) 326,300/ 300,000/ 300,000
IB-Internal Bond (psi) 90/ 80/ 60
Face Screw Holding (lbs) 250/ 250/ 250
Edge Screw Holding (lbs) N/A/ 175/ 175
Formaldehyde Emissions (ppm) .20/ .20/ .20
Flame Spread 20/ 20/ 20
Smoke Developed 35/ 35/ 35
Tolerances
Length and Width ±1/16"
Squareness ±1/8"
Straightness 1/64" /2ft.
Thickness (within panels) ±0.004"
Thickness (panel to panel) ±0.004"

Thickness/Sizes/Other

Thickness (in.): 3 ⁄8 – 1 1⁄8
Panel Sizes: Standard 4-foot sizes
 Document Resource Section


 Print this Page






Professional Resources Available for this Product

MSDS Sheet: TI_Temstock-FR_msds.pdf
Temple Insland FR MSDS

Vendor Product Certifications: CPA_Carb_Certification_Producres_memo_CARB_Compliant_206_2024_2008(3).pdf
CPA certification program CARB COMPLIANT PANEL PRODUCERS letter dated 6-24-2008

Vendor Sales Sheet: TemStockMRFR_sales_and_tech(1).pdf
Temple Indland FR brochure