All Categories >> Construction Materials

Superply by Roseburg

General Description

Contact "McKillican National Sales Desk" for information and availability concerning these products @ 541-679-4957

SuperPly is an exterior, sanded plywood panel. The faces are specially selected veneers which are light in color and have little distinction between sapwood, heartwood and growth rings, resulting in a smooth, uniform appearance. Minor splits, indents, and wormholes are putty filled. SuperPly meets or exceeds all veneer grade, adhesive, construction, and workmanship requirements of PS 1-83.
USGBC LEED Potential Credits = 2
LCA ''Life Cycle Assessment'' available LCA ''Life Cycle Assessment'' available?
NAUF? No Added Urea-Formald.   Formaldehyde-Free Adhesive? No Added Formald.
Recycled? Recycled        
Manufactured at:   OR 97402
SCS? SCS / 3rd party document available
FSC? FSC document available   SFI? SFI document available
California Air Resources Board Compliant:   meets CARB1? meets CARB1    meets CARB2? meets CARB2
Industry Certifications: EPP Certification? EPP Certification   KCMA Certification? KCMA Certification   SWAQMD VOC 1168? SWAQMD VOC 1168

Finished Product Options

Roseburg SuperPly can be sawed, routed, shaped, and drilled. Always use sharp, high-speed tools. Because of the cross-layer construction,
nails, screws, and other fasteners may be placed near the panel edge without splitting the panel. SuperPly should be securely fastened with 6d nails on 1/4", 11/32", 15/32" panels and with 8d nails on 19/32" and 23/32" panels. Space nails 6" o.c. around all panel edges and 12" o.c. on intermediate supports. For soffit applications, all panel edges should be supported. Nails should penetrate at least one inch into the substrate material. Leave 1/8" gap between panel edges. Spiral or ring shank nails offer the best holding power. Screws and bolts can also be used.

Ideal Applications

SuperPly applications fall into two main categories:
1. Industrial uses that require strength, stiffness, and a very smooth face
2. Commercial uses that require a uniform, smooth face for painting. SuperPly is not intended to be used as an underlayment. Some typical applications would be:
• Transportation industry
• Shelving
• Displays • Home projects
• Marine industry • General use
• Containers • Construction industry
• Furniture • Overlay applications
• Containers • Construction industry
• Furniture • Overlay applications

Physical Properties

Storage:
Since SuperPly is normally finished, it is important to keep the material dry prior to use. Storage in a warehouse or under roof is recommended. If stored outdoors, units should be off the ground and covered loosely with some type of protective material.

Thickness/Sizes/Other

Panel Sizes:
4 x 8, 4 x 9, 4 x 10

Available In:
1/4", 11/32", 15/32", 19/32", 23/32"
 Document Resource Section


 Print this Page