All Categories >> Construction Materials

FSC Industrial grade DuraGard MDO by Roseburg

General Description

Contact "McKillican National Sales Desk" for information and availability concering these products @ 541-679-4957

Roseburg’s FSC DuraGard is made with a high-quality
paper saturated with phenolic resin solids and overlaid on
our exterior-grade plywood panels. The specially selected
hardwood veneer beneath the overlay provides a smooth surface
ideal for painting. DuraGard is manufactured with
waterproof resins that meet or exceed all veneer-grade, adhesion,
and construction requirements of PS 1-95.


DuraGard plywood is stronger, more rigid, and less
subject to creep than composition products. Innerplies and
backs are all “C” grade or better as outlined in PS 1-95. The
overlay is bonded to the specially selected hardwood veneer
for a smooth, paintable surface. DuraGard may be specified
on one or two sides.

Environmental Description

FSC product code: SW-COC-376
USGBC LEED Potential Credits = 3
LCA ''Life Cycle Assessment'' available LCA ''Life Cycle Assessment'' available?
NAUF? No Added Urea-Formald.   Formaldehyde-Free Adhesive? No Added Formald.
Recycled? Recycled        
Manufactured at:   OR 97470
SCS? SCS / 3rd party document available
FSC? FSC document available   SFI? SFI document available
California Air Resources Board Compliant:   meets CARB1? meets CARB1    meets CARB2? meets CARB2
Industry Certifications: EPP Certification? EPP Certification   KCMA Certification? KCMA Certification   SWAQMD VOC 1168? SWAQMD VOC 1168

Finished Product Options

Finishing
DuraGard should always be painted when exposed to
weather or humid conditions. To ensure good adhesion, use a
primer coat produced by the same manufacturer as the finish
coat and follow the manufacturer’s specific application recommendations.
Panels must be dry when applying the finish.
Panels intended for exterior exposure should be edge
sealed with two heavy coats of top-quality exterior paint formulated
for wood. Edges are most easily sealed when panels
are in a stack. Roseburg offers factory priming on one side,
two sides, and edges.

Ideal Applications

Storage
Because DuraGard is usually finished, it is important to
keep the product dry before use. Roseburg recommends storing
DuraGard in a warehouse or under roof. If stored outdoors,
units should be covered loosely with a protective material.

Physical Properties

See complete data provided below.

Meeting the Standards:
All APA and PSI / Pittsburgh Testing plywood and other woodbased
panel products are grade stamped under any one or combination of PS 195, PS 292, PRP108, FHA UM 62b, or FHA 40 standards, based
on the type of product. These standards include grades of veneer, glue bond requirements, thickness tolerances, span ratings, testing procedures, identification and stamping guidelines, etc. R.F.P. guarantees its products to follow these guidelines.

Specifically, Roseburg Forest Product’s meet the paper overlay, construction, veneer grade, workmanship, dimension tolerance, and glue bond requirements for exterior grade panels as outlined in the U.S. Department of Commerce’s Voluntary Products Standard for Construction and Industrial Plywood, or PS 195. In addition, this product code specifies testing, identification, and stamping guidelines that R.F.P.’s Medium Density Overlay Plywood follow.

Thickness/Sizes/Other

3/8" 4-ply 4x84x10
1/2" 5-ply 4x8 x410
5/8" 5-ply 4x8 4x10
3/4" 7-ply 4x8 4x10
 Document Resource Section


 Print this Page