All Categories >> Adhesives

PVA Postforming Hot Press Adhesive - Wilsonart WA3001

General Description

Wilsonart WA 3001 PVA Adhesive for Postforming and Hot Press Applications. An emulsion of water and polyvinyl acetate suitable for bonding decorative laminate to wood products.\

Avoid application to tempered hardboard, fire retardant treated, moisture resistant products, low pressure melaminate, metallic, polyester, painted surfaces and liner grade laminate to plywood.
USGBC LEED Potential Credits = 2
LCA ''Life Cycle Assessment'' available LCA ''Life Cycle Assessment'' available?
NAUF? No Added Urea-Formald.   Formaldehyde-Free Adhesive? No Added Formald.
Recycled? Recycled        

SCS? SCS / 3rd party document available
FSC? FSC document available   SFI? SFI document available
California Air Resources Board Compliant:   meets CARB1? meets CARB1    meets CARB2? meets CARB2
Industry Certifications: EPP Certification? EPP Certification   KCMA Certification? KCMA Certification   SWAQMD VOC 1168? SWAQMD VOC 1168

Ideal Applications

Glue spreader or spray application
Glue spreader / pinch roller
Glue spreader / hot press
Suitable for postforming
Consumer or Professional Use

Physical Properties

Color: Green
Viscosity: 2580 cps (typical)
Solids Content: 58% +/- 2%
pH: 4 - 5 (typical)
VOC Content; <20 g/L (meth. 24)
VHAP Content: <0.032 lbs / lbs solids
Coverage (spreader): ~229 sq.ft. / gal @ 7 wet mils
Coverage (spray): ~255 sq.ft. ' gal (bonded)

Thickness/Sizes/Other

275 gallon caged totes (returnable)
55 gallon drums
5 gallon pails
 Document Resource Section


 Print this Page






Professional Resources Available for this Product

MSDS Sheet: 3001_00018950[1].pdf
Wilsonart WA 3001 - MSDS

Vendor Product Certifications: GREENGUARD_WA3001.pdf
GREENGUARD WA3001

Vendor Tech Data Sheet: WA_3001_TD.pdf
WA 3001 TechData