All Categories >> Adhesives

Hot Melt Adhesive - Titebond MP75 HiPurformer Polyurethane Hot Melt Adhesive

General Description

Titebond MP75 HiPURformer Polyurethane Hot Melt Adhesive combines the highest quality polyrethane hot melt adhesives with an efficient, cost effection application system.

The Titebond MP75 is the adhesive of this innovative system Designed for wood and wood-composite applications, it offers a low viscosity and a faster set time. This eliminates the need for nails, staples, screws or other mechanical fasterners.

Avoid applications that include use of copper or metal alloys containing copper. Not for continuous submerision or below waterline use.

Environmental Description

Waterproof
Solvent free
Nonflammable
USGBC LEED Potential Credits = 1
LCA ''Life Cycle Assessment'' available LCA ''Life Cycle Assessment'' available?
NAUF? No Added Urea-Formald.   Formaldehyde-Free Adhesive? No Added Formald.
Recycled? Recycled        

SCS? SCS / 3rd party document available
FSC? FSC document available   SFI? SFI document available
California Air Resources Board Compliant:   meets CARB1? meets CARB1    meets CARB2? meets CARB2
Industry Certifications: EPP Certification? EPP Certification   KCMA Certification? KCMA Certification   SWAQMD VOC 1168? SWAQMD VOC 1168

Ideal Applications

Application Temperature: 250 degrees fahrenheit
Service Temperatures: -20 to 275 degrees fahrenheit
Method of Application: HiPURformer adhesive applicator.
(Steinel high quality cordless,
lightweight and easy to use applicator)
Coverage: 71 linear ft of 1/16" (OD bead) per 50
gram cartridge.
Working Surface: Dry and free from dust, dirt or other
material that may deter adhesion.
Apply adhesive, join surfaces to be
bonded, hold firmly in place until
adhesive sets (approximately 30
seconds).
Clean-up: Allow squeeze out to become firm and
remove with a putty knife. Fully cured
material can be removed by sanding or
cutting. Do not use heat or flame.

Physical Properties

Type: Polyurethane
State: Solid
Color: Translucent
Dried: Opaque White Film
Solids: 100%
Viscosity: 9,500 cps @ 250 degrees fahrenheit
VOC: 0 g / L
Wt/Gal. 9.8 lbs
Flashpoint: N/A
Stability: Will not freeze
Storage Life: 12 months in unopened container. 4 weeks
after opened.

Thickness/Sizes/Other

50 gram Cartridge (1321)
HiPURformer Adhesive Applicator (1361)
 Document Resource Section


 Print this Page






Professional Resources Available for this Product

MSDS Sheet: Titebond_HiPURformer_MP75_MSDS.doc
Int/Ext Hot Melt Adhesive - Titebond MP75 HiPurformer Polyurenthane Hot Melt Adhesive (1321) - MSDS

Vendor Tech Data Sheet: Titebond_HiPURformer_MP75_Tech_Data[1].pdf
Int/Ext Hot Melt Adhesive - Titebond MP75 HiPURformer Hot Melt Adhesive (1321) - Tech Data